InLED 230V machine light with the joint arm and transformer
Supply voltage | 230 VAC +-20% |
Consumption | 9 W |
Light source | LED Cree XHP-50 Ra=80 |
Luminous flux | 1500 lm |
Minimal lifetime | 80 000 h |
Ingress protection | IP67 |
Ambient temperature | -20 to +50°C |
Luminary body diameter | 70 mm |
Luminary body length | 70 mm |
Transformer housing height | 100 mm |
Standard arm length | 400 mm |
Chromacity temperature | 5000K (different on request) |
We provide volume discounts from 11 pcs, 101 pcs
Choose a variant
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KX1/40D/TA | Outlet through the side gland, switch | 40° |
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KX1/16D/TA | Outlet through the side gland, switch | 16° |
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KX1/120D/TA | Outlet through the side gland, switch | 40° |
Specifications - InLED 230V machine light with the joint arm and transformer
Product description
Industrial lighting of machines is important both from the point of view of production quality and from the point of view of work safety and requires the use of specialized machine lights. These machine lights are characterized by a high degree of ingress protection and robust construction. The InLED 230V machine light is suitable for local lighting of smaller objects and we recommend it as a replacement for older halogen machine lights with an input of 50 to 75W. The InLED 230V machine light has proven itself excellently for lighting smaller machines such as conventional or NC drills, milling machines, and lathes, but it can also be used on presses and other machines, or as a robust lamp for a workbench. The body of the machine light is made of an extruded aluminum profile, it is fitted with one LED chip and completed with an aspherical glass lens. The InLED 230V machine light has an overall degree of ingress protection IP67.
The InLED 230V machine lamp can be fitted with lenses with an apex angles of 16°, 40°, and 120°. Inside the lamp is a switched-mode power supply that supplies the LED with a constant current in the range of supply voltages 230V+-20% st.
The machine light is attached by a two-part articulated arm, seated on a plastic cover with a transformer. The cover has three holes for mounting screws. The supply cable with the fork is brought out through the outlet on the side of the transformer cover.
We do not recommend using this light without additional protection in close proximity to working welders and lasers, as their intense UV radiation is capable of degrading the LED chip.
Download
Advantages
Minimum thermal effect on the illuminated object
Very small machine light dimensions, allowing the lamp to be placed close to the object to be illuminated
Robust articulated arm with large extension and high braking force
Good color rendering
Machine light lifetime of at least 80 000 hours, end of light bulb changes!
Payback time compared to a 50W halogen light is approx. 2 months (lighting 16h per day)
The product has been added to the cart

Spot machine lights 230V InLED 230V machine light with the joint arm and transformer
Minimum thermal effect on the illuminated object Very small machine light dimensions, allowing the lamp to be placed close to the object to be illuminated Robust articulated arm with large extension and high braking force Good color rendering Machine light lifetime of at least 80 000 hours, end of light bulb changes! Payback time compared to a 50W halogen light is approx. 2 months (lighting 16h per day)