InLED luminaire with joint

from

Načítám...

Supply voltages	DC 10 to 48 V, AC 12 to 35 V
Consumption	9 W
Light source	LED Cree XHP-50 Ra=80
Luminous flux	1500 lm
Minimal lifetime	50 000 h
Ingress protection	IP69 (with switch IP67)
Ambient temperature	-20 to +50°C
Luminary body diameter	70 mm
Luminary body length	70 mm
Stand height	46 mm
Joint length	90 mm
Chromacity temperature	5000K (different on request)

We provide volume discounts from 11 pcs, 101 pcs

Choose a variant

InLED/RV7/KM1/40D

Price without VAT 132.74 EUR

Ordering code	Characteristics	Beam angle
InLED/RV7/KM1/40D	Outlet through the side gland, switch	40°

InLED/RV7/KM0/40D

Price without VAT 130.93 EUR

Ordering code	Characteristics	Beam angle
InLED/RV7/KM0/40D	Outlet through the bottom, switch	40°

InLED/RV7/KM1/16D

Price without VAT 132.74 EUR

Ordering code	Characteristics	Beam angle
InLED/RV7/KM1/16D	Outlet through the side gland, switch	16°

Specifications - InLED luminaire with joint

Product description

The InLED luminaire is suitable for local lighting of smaller objects and is recommended as a replacement for older halogen luminaires with an input power of 50 to 75W. The luminaire body is made of extruded aluminum profile, fitted with one LED chip and complemented by an aspherical glass lens. The sealing of the luminaire is guaranteed by the IP69 protection rating (100 bar water jet) in the version without a switch. If the luminaire is equipped with a rocker switch on the head, the overall degree of protection is IP67.

The luminaire can be fitted with lenses with a peak angle of 16°, 40°, and 120°. Inside the luminaire is a switched power supply that provides constant current power to the LEDs over a range of supply voltages from 10 to 48 VDC or 12-35 VAC. If you do not have a low voltage power supply on your machine, you will find suitable power supplies in the Accessories and Spare Parts section.

The luminaire is attached to a metal joint mounted on a metal stand with four screw holes. The cable outlet from the stand is either through the bottom or through a gland on the side of the stand. The fixing can be supplemented at extra cost with a switchable magnetic holder or plate clamp.