InLED machine light with joint
Supply voltages | DC 10 to 48 V, AC 12 to 35 V |
Consumption | 9 W |
Light source | LED Cree XHP-50 Ra=80 |
Luminous flux | 1500 lm |
Minimal lifetime | 50 000 h |
Ingress protection | IP69 (with switch IP67) |
Ambient temperature | -20 to +50°C |
Luminary body diameter | 70 mm |
Luminary body length | 70 mm |
Stand height | 46 mm |
Joint length | 90 mm |
Chromacity temperature | 5000K (different on request) |
We provide volume discounts from 11 pcs, 101 pcs
Choose a variant
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KM1/40D | Outlet through the side gland, switch | 40° |
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KM0/40D | Outlet through the bottom, switch | 40° |
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KM1/16D | Outlet through the side gland, switch | 16° |
Specifications - InLED machine light with joint
Product description
Industrial lighting of machines is important both from the point of view of production quality and from the point of view of work safety and requires the use of specialized machine light. These lights are characterized by a high degree of ingress protection, a robust construction, and the ability to work with a safe voltage of 12 or 24V. The LED machine light InLED 24V is suitable for local lighting of smaller objects and we recommend it as a replacement for older halogen machine lights with an input of 50 to 75W. The InLED 24V machine lamp has proven itself excellently for lighting smaller machines such as conventional or NC drills, milling machines, and lathes, but it can also be used on presses and other machines. The body of the machine light is made of an extruded aluminum profile, it is fitted with one LED chip and completed with an aspherical glass lens. The sealing of the machine light guarantees protection degree IP69 (jetting water 100 bar) in the version without a switch. If the machine light is equipped with a rocker switch on the head, the total degree of ingress protection is IP67.
The InLED machine light can be equipped with lenses with an apex angle of 16°, 40°, and 120°. Inside the machine light is a switched-mode power supply that supplies the LED with a constant current in the range of supply voltages 10 to 48 V DC or 12-35 V AC. If you do not have a low-voltage power supply on your machine, you can find suitable power supplies in the Accessories and spare parts section.
The InLED/KM machine light is attached to the machine by a metal joint with three degrees of freedom, located on a metal stand with four holes for fastening screws. The cable outlet from the stand is either from the bottom or through the outlet on its side. The fastening can be supplemented with a switchable magnetic holder or a clamp on the board for an additional fee.
We do not recommend using this machine light without another protection in close proximity to working welders and lasers, as their intense UV radiation can degrade the LED chip.
Download
Advantages
Machine light lifetime of at least 80,000 hours, no more changing bulbs!
Minimal heating of the illuminated object
Very small dimensions, allowing to place the machine light near the illuminated object
Good color rendering
Replacement halogen machine light 50-75W
Consumption of only 9W - Payback compared to a 50W halogen light approx. 2 months (lights 16 hours a day)
The product has been added to the cart

Spot machine lights 24V InLED machine light with joint
Machine light lifetime of at least 80,000 hours, no more changing bulbs! Minimal heating of the illuminated object Very small dimensions, allowing to place the machine light near the illuminated object Good color rendering Replacement halogen machine light 50-75W Consumption of only 9W - Payback compared to a 50W halogen light approx. 2 months (lights 16 hours a day)