InLED 230V machine light with the joint arm and transformer

from

Načítám...

Supply voltage	230 VAC +-20%
Consumption	9 W
Light source	LED Cree XHP-50 Ra=80
Luminous flux	1500 lm
Minimal lifetime	80 000 h
Ingress protection	IP67
Ambient temperature	-20 to +50°C
Luminary body diameter	70 mm
Luminary body length	70 mm
Transformer housing height	100 mm
Standard arm length	400 mm
Chromacity temperature	5000K (different on request)

We provide volume discounts from 11 pcs, 101 pcs

Choose a variant

InLED/RV7/KX1/40D/TA

Price without VAT 205.78 EUR

Ordering code	Characteristics	Beam angle
InLED/RV7/KX1/40D/TA	Outlet through the side gland, switch	40°

InLED/RV7/KX1/16D/TA

Price without VAT 205.78 EUR

Ordering code	Characteristics	Beam angle
InLED/RV7/KX1/16D/TA	Outlet through the side gland, switch	16°

InLED/RV7/KX1/120D/TA

Price without VAT 205.78 EUR

Ordering code	Characteristics	Beam angle
InLED/RV7/KX1/120D/TA	Outlet through the side gland, switch	40°

Specifications - InLED 230V machine light with the joint arm and transformer

Product description

Industrial lighting of machines is important both from the point of view of production quality and work safety and requires the use of specialized machine lights. These machine lights are characterized by high ingress protection and robust construction. The InLED 230V machine light is suitable for local lighting of smaller objects, and we recommend it as a replacement for older halogen machine lights with an input of 50 to 75W. The InLED 230V machine light has proven excellent for lighting smaller machines such as conventional or NC drills, milling machines, and lathes. Still, it can also be used on presses and other machines or as a robust lamp for a workbench. The body of the machine light is made of an extruded aluminum profile, fitted with one LED chip, and completed with an aspherical glass lens. The InLED 230V machine light has an overall degree of ingress protection IP67. The InLED 230V machine lamp can have lenses with apex angles of 16°, 40°, and 120°. Inside the lamp is a switched-mode power supply that supplies the LED with a constant current in the range of supply voltages 230V+-20% st.

The machine light is attached by a two-part articulated arm, seated on a plastic cover with a transformer. The cover has three holes for mounting screws. The supply cable with the fork is brought out through the outlet on the side of the transformer cover.

We do not recommend using this light without additional protection in close proximity to working welders and lasers, as their intense UV radiation can degrade the LED chip.