InLED 24V machine light with joint arm
Supply voltage | DC 10 to 48 V, AC 12 to 35 V |
Consumption | 9 W |
Light source | LED Cree XHP-50 Ra=80 |
Luminous flux | 1500 lm |
Minimal lifetime | 80 000 h |
Ingress protection | IP69 (with switch IP67) |
Ambient temperature | -20 to +50°C |
Luminary body diameter | 70 mm |
Luminary body length | 70 mm |
Stand height | 46 mm |
Standard arm length | 400 mm |
Chromacity temperature | 5000K (different on request) |
We provide volume discounts from 11 pcs, 101 pcs
Choose a variant
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KX1/40D | Outlet through the side gland, switch | 40° |
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KX0/40D - kopie | Outlet through the bottom, switch | 40° |
Ordering code | Characteristics | Beam angle |
---|---|---|
InLED/RV7/KX1/16D - kopie | Outlet through the side gland, switch | 16° |
Specifications - InLED 24V machine light with joint arm
Product description
Machine lighting is important both from the point of view of production quality and from the point of view of work safety and requires the use of specialized machine lights. These lights are characterized by a high degree of ingress protection, robust construction, and the ability to work with a safe voltage of 12 or 24V. The LED machine light InLED 24V is suitable for local lighting of smaller objects and we recommend it as a replacement for older halogen machine lights with an input of 50 to 75W. The InLED 24V machine light has proven itself excellently for lighting smaller machines such as conventional or NC drills, milling machines, and lathes, but it can also be used on presses and other machines. The body of the machine lamp is made of an extruded aluminum profile, it is fitted with one LED chip and completed with an aspherical glass lens. The sealing of the machine light guarantees ingress protection degree IP69 (jetting water 100 bar) in the version without the switch. If the lamp is equipped with a rocker switch on the head, the total degree of ingress protection is IP67.
The InLED machine light can be equipped with lenses with apex angles of 16°, 40°, and 120°. Inside the lamp is a switched-mode power supply that supplies the LED with a constant current in the range of supply voltages 10 to 48 V DC or 12-35 V AC. If you do not have a low-voltage power supply on your machine, you can find suitable power supplies in the Accessories and spare parts section.
The InLED/KX LED machine light is attached to the machine by a metal joint arm, terminated by a metal stand with four holes for fastening screws. The cable outlet from the stand is either from the bottom or through the outlet on its side. The fixture can be completed with a switchable magnetic holder or a clamp on the board for an additional fee.
We do not recommend using this machine light without another protection in close proximity to working welders and lasers, as their intense UV radiation can degrade the LED chip.
Download
Advantages
Machine light lifetime of at least 80,000 hours, no more bulb changes!
Minimum thermal effect on the illuminated object
Very small luminaire dimensions, allowing the luminaire to be placed close to the object to be illuminated
Joint arm positioning in five axes
Good color rendering
Payback time compared to a 50W halogen machine lamp is approx. 2 months (lighting 16h per day)
The product has been added to the cart

Spot machine lights 24V InLED 24V machine light with joint arm
Machine light lifetime of at least 80,000 hours, no more bulb changes! Minimum thermal effect on the illuminated object Very small luminaire dimensions, allowing the luminaire to be placed close to the object to be illuminated Joint arm positioning in five axes Good color rendering Payback time compared to a 50W halogen machine lamp is approx. 2 months (lighting 16h per day)